Pricing · 10 Min Read · Includes Worked Example And Checklist
How To Price A Government Bid: Labor, Indirect Costs And Margin
How to build a government price from labor hours and real rates, how wrap rates and indirect costs work, what fee the law allows and how to check your price against the market.
Quick Answer
To price a government contract, start from the contract type and the solicitation's pricing instructions. Estimate the hours each labor category needs, apply your direct labor rates, then add your indirect costs (fringe, overhead and general and administrative) and any other direct costs, and finish with fee or profit. Check the result against what the agency has paid before and against labor-law wage floors. Fee on cost-plus-fixed-fee contracts is capped by law; on fixed-price work there is no set cap, but the price must be fair and reasonable.
Start With The Contract Type
The contract type decides who carries the cost risk, and so how you price. Since the FAR overhaul, fixed-price is the default: an updated FAR Part 16 posted on July 1, 2026 requires a justification and higher approval before agencies use other contract types, for solicitations issued on or after July 15, 2026. Expect to see more fixed-price work.
| Contract type | What you are paid | Who carries cost risk | Pricing focus |
|---|---|---|---|
| Firm-fixed-price (FFP) | A set price for defined work or deliverables | You. If it costs more, you absorb it | Accurate hours, risk allowance, realistic profit |
| Time-and-materials / labor-hour (T&M / LH) | Fixed hourly rates per labor category, plus materials at cost for T&M | Shared. Rates are fixed, hours vary | Fully burdened hourly rates that include profit |
| Cost-reimbursement (such as cost-plus-fixed-fee) | Allowable costs plus a fee | Mostly the government | Allowable costs, an adequate accounting system and fee within legal limits |
The Building Blocks Of A Government Price
Every government price, whatever the contract type, is built from the same parts. What changes is how they are shown in your cost volume.
| Element | What it covers | Usually applied to |
|---|---|---|
| Direct labor | Pay for the hours people spend on this contract | Hours estimated per labor category |
| Fringe | Payroll taxes, health insurance, paid leave, retirement | Direct labor |
| Overhead | Costs of supporting the delivery staff: facilities, supervision, tools | Direct labor (often including fringe) |
| General and administrative (G&A) | Running the company: finance, HR, executives, business development | Total cost before G&A |
| Other direct costs (ODCs) | Travel, materials, licenses, equipment bought for this contract | Itemized, often with G&A applied |
| Subcontracts | Work done by teaming partners | Their quoted price, sometimes with G&A or handling |
| Fee or profit | Your return for the work and risk | Total cost |
Three indirect pools (fringe, overhead and G&A) is a common structure for small contractors, but it is not the only one. Some firms use a single overhead pool. What matters is that your structure matches how your accounting system actually records costs, and that you apply it the same way on every bid.
Each layer is applied on top of the one before it, which is why small rate changes compound.
Worked Example: Building A Fully Burdened Rate
The rates below are made up to show the math. They are not benchmarks; use your own rates from your accounting records.
| Step | Calculation | Running total per hour |
|---|---|---|
| Direct labor rate | Given | $50.00 |
| Add fringe at 30% | $50.00 × 30% = $15.00 | $65.00 |
| Add overhead at 20% | $65.00 × 20% = $13.00 | $78.00 |
| Add G&A at 12% | $78.00 × 12% = $9.36 | $87.36 |
| Add fee at 8% | $87.36 × 8% = $6.99 | $94.35 |
In this example the wrap rate is about 1.75 before fee ($87.36 ÷ $50.00) and about 1.89 with fee ($94.35 ÷ $50.00). The $94.35 is the fully burdened rate you would quote on a T&M or labor-hour contract.
What Is A Wrap Rate?
A wrap rate is the multiplier that turns a direct labor rate into a fully loaded cost (or price) per hour. It tells you, at a glance, how much each dollar of direct pay really costs your company. Firms report it with or without fee, so always say which. Watch your wrap rate over time: if it climbs, your indirect costs are growing faster than your billable work, and your prices will become harder to win with. Our wrap rate guide goes deeper, and the free wrap rate calculator does the math for you.
What Profit Margin Is Allowed On A Government Contract?
For cost-plus-fixed-fee contracts, the fee is capped by statute and set out in FAR 15.404-4:
| Type of cost-plus-fixed-fee work | Maximum fee |
|---|---|
| Experimental, developmental or research work | 15% of estimated cost, excluding fee |
| Architect-engineer services for public works or utilities | 6% of the estimated cost of construction, excluding fees |
| All other cost-plus-fixed-fee contracts | 10% of estimated cost, excluding fee |
Cost-plus-a-percentage-of-cost contracting is prohibited outright. For fixed-price and T&M work there is no set percentage. Your profit is part of your price, and the test is whether the total price is fair and reasonable and competitive. When the government negotiates based on cost analysis, contracting officers weigh factors such as your risk, the difficulty of the work and your investment when setting their profit objective.
How To Price A Government Contract In 8 Steps
- Read The Pricing Instructions First. Find the contract type, contract line items (CLINs), pricing template, period of performance and any required format in the solicitation. Price exactly the way the government asked.
- Build A Basis Of Estimate. Break the work into tasks and estimate hours by labor category, with the assumption behind each number. Your hours must match the staffing in your technical approach.
- Set Direct Labor Rates. Use what you actually pay, or will pay, each category. For service contracts, check the wage determinations on SAM.gov: the Service Contract Act sets minimum wages and fringe benefits for covered service employees on contracts over $2,500.
- Apply Your Indirect Rates. Apply fringe, overhead and G&A from your accounting records, in the same order every time. Do not invent rates to hit a number.
- Add Other Direct Costs And Subcontracts. Itemize travel, materials, licenses and equipment. Get written quotes from subcontractors and check their pricing follows the same rules.
- Add Escalation And Risk. Multi-year contracts need escalation on labor. Fixed-price work needs an honest allowance for the risks you are carrying.
- Add Fee Or Profit. Choose a fee that reflects your risk and stays within any legal limit for the contract type.
- Test Against The Market, Then Document. Compare your rates and total price with what the agency has paid before. Run higher and lower scenarios. Record every assumption so the price can be explained and defended.
Price To Win: Check Your Price Against The Market
A price built only from your costs can still lose. Before you finalize, look at what the government actually pays:
| Tool | What it shows | How to use it |
|---|---|---|
| GSA CALC+ | Awarded hourly ceiling rates on GSA schedule contracts, by labor category | Compare your fully burdened rates with similar categories. Ceiling rates include profit, and actual prices are often lower |
| USAspending.gov | Past award values by agency, NAICS and recipient | Find what the agency paid for similar work and who won |
| SAM.gov Contract Data | Federal contract award records | Check contract values, types and incumbents |
| SAM.gov wage determinations | Minimum wages and fringe for covered service work by area | Make sure your rates do not fall below the legal floor |
If your price lands far above past awards, find out why before you submit: your staffing, your indirect rates, or a requirement that has grown. If it lands far below, check whether you can still deliver profitably. Evaluators may judge a price that is too low as unrealistic.
Allowable Costs And Your Accounting System
On cost-reimbursement work, only costs that are allowable under FAR Part 31 can be billed. Some costs, such as entertainment and alcohol, are never allowable, so keep them out of your indirect pools. Cost-reimbursement contracts also generally require an accounting system the government considers adequate before award.
The Defense Contract Audit Agency publishes free small business presentations on accounting systems, indirect rates and audits. They are worth reading before you bid on your first cost-type contract.
Document Your Price With A Basis Of Estimate
A basis of estimate explains where every number came from. Evaluators use it to judge whether your price is realistic, and your own team uses it to update the price when the requirement changes. Copy this outline for each task or CLIN.
Basis Of Estimate Outline
BASIS OF ESTIMATE Task or CLIN: [name and number from the solicitation] Work description: [what this task delivers, in the solicitation's words] Labor - Labor category: [category] | Hours: [number] | Basis: [why this many hours: past project, staffing model or productivity rate] - Labor category: [category] | Hours: [number] | Basis: [ ] Rates - Direct labor rate source: [payroll records, offer letters or wage determination] - Indirect rates applied: [fringe %, overhead %, G&A %] and their basis: [actual or provisional rates for which period] Other direct costs - [item] | Quantity: [ ] | Unit cost: [ ] | Source: [quote, catalog or past purchase] Assumptions and risks - [assumption the price depends on] - [risk and how the price allows for it] Cross-check - Matches technical approach section: [section number] - Compared with: [past award, CALC+ category or wage determination]
Common Pricing Mistakes
- Ignoring the pricing instructions and template in the solicitation
- Staffing in the price that does not match the technical approach
- Making up indirect rates to reach a target price
- Rates below the Service Contract Act wage determination
- Forgetting escalation, transition or ramp-up costs
- Leaving unallowable costs in indirect pools
- Fee above the legal limit on a cost-plus-fixed-fee contract
- Pricing so low the evaluators question whether you can perform
- Not documenting the assumptions behind the numbers
- Ignoring the cash-flow effect of payment terms
Government Pricing Checklist
Run through this before the cost volume goes to final review.
Government Pricing Checklist
Tip: copy this into your proposal schedule and give each line an owner.
Key Takeaways
- Read the contract type and pricing instructions before anything else.
- Build from hours and real rates; never back into a number.
- Fee on cost-plus-fixed-fee contracts is capped at 15%, 10% or 6% depending on the work.
- Check your price against past awards, CALC+ and wage determinations before you submit.
Frequently Asked Questions
How do you price a government contract?
Start from the contract type and the solicitation's pricing instructions. Estimate hours by labor category, apply direct labor rates, add fringe, overhead and G&A, add other direct costs and subcontracts, then add fee or profit. Check the total against past awards and wage floors, and document every assumption.
What profit margin is allowed on a government contract?
For cost-plus-fixed-fee contracts, fee is capped at 15% of estimated cost for research and development work, 6% of estimated construction cost for architect-engineer design of public works, and 10% for other work. Fixed-price contracts have no set cap, but the price must be fair, reasonable and competitive.
What is a wrap rate?
A wrap rate is the multiplier that turns a direct labor rate into a fully loaded cost or price per hour. It is calculated by dividing the fully burdened rate by the direct labor rate. Always state whether it includes fee.
What are indirect costs in government contracting?
Indirect costs are costs that support more than one contract, such as benefits, facilities and company management. They are usually grouped into pools such as fringe, overhead and general and administrative, and applied to direct costs as percentage rates.
Do I need a DCAA-approved accounting system?
You need an accounting system the government considers adequate before you can win a cost-reimbursement contract. Firm-fixed-price contracts generally do not require one. DCAA publishes free guidance for small businesses on what an adequate system looks like.
Does the Service Contract Act affect my price?
Yes, if it applies. The Service Contract Act covers many service contracts over $2,500 and sets minimum wages and fringe benefits for covered employees through wage determinations on SAM.gov. Your rates cannot fall below them.
Is This Bid Worth Pricing?
Pricing takes real effort. Our Capture & Pipeline Monitoring helps you decide which opportunities deserve it, with a documented bid/no-bid decision before you build a price.
Sources
- Acquisition.gov: FAR 15.404-4, Profit
- Acquisition.gov: FAR Overhaul, Part 16, Types Of Contracts
- Wiley: FAR Council Updates Class Deviation Text For Part 16 (July 2026)
- Acquisition.gov: FAR Part 31, Contract Cost Principles
- U.S. Department of Labor: Service Contract Act FAQ
- SAM.gov: Wage determinations
- GSA: CALC+ Quick Rate
- DCAA: Small business presentations
Related Guides
Talk To Us About Your Next Bid
Book a free call at a time that suits you. We will come back with a clear view of where to start.